Description
ALG Defense Single Stage ALG Combat Trigger (ACT) for AR-15/LR-308
The ALG Defense ALG Combat Trigger (ACT) is an enhanced Mil-Spec type AR-15 trigger. The ACT is very similar to Mil-Spec units in pull weight, but the polished surfaces and hard-lubing result in a smoother pull with a sharper break. The pull weight is 6.0 pounds, which falls within the Military specifications of 5.5 to 9.0 pounds. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs. The Mil-Spec pull weight makes this trigger perfect for users who want all of the rugged reliability of a standard trigger combined with the added benefits of an improved pull and a sharp, clean break. The trigger and hammer are 8620 steel alloy and the disconnector is 1070 high-carbon steel, all tempered and hardened to Military Specifications. The included pins are 4140 tempered chrome moly steel that is centerless ground to 0.001″ larger than stock for an improved fit within the lower receiver, while still remaining slip-fit and field serviceable.
The ALG Defense ALG Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns are of primary importance. Tuned by Geissele Automatics.
- Mfr Part: 05-199
- The ACT trigger pull is smoother and sharper than a stock trigger. This is accomplished by polishing the sear surfaces smooth and HardLubing the trigger components.
- Sear geometry has not been changed from the standard profile so the high reliability that the stock trigger is known for is unchanged.
- Trigger and hammer are made from true 8620 alloy steel military specification castings, correctly carburized, quenched and tempered for high surface hardness.
- Disconnector is 1070 High Carbon steel properly Austempered into the spring range of hardness.
- Springs are corrosion resistant and meet military specifications.
- A full force hammer spring is used for positive ignition of all type of ammunition.
- Trigger and hammer pins are improved over stock mild steel by using 4140 Chrome-Moly steel that has been quenched and tempered. Pins are centerless ground to a fine finish and a diameter 0.001” larger than stock to reduce play in the trigger assembly while retaining a slip fit into the weapon lower receiver. Both pins are Nickel-Teflon coated.
