Description
Adams Arms 5.56 7.5″ Pistol Gas System .750 1:7 AR15 Complete Barrel
MAY BE MOUNTED TO PISTOLS OR REGISTERED SBR LOWERS ONLY
Build as a pistol or Short Barreled Rifle (SBR) with proper license (all NFA rules applying to SBR and check all local laws applying to SBR before ordering).
No lower included. May be shipped to your door, no FFL required. NEVER PUT THIS ON A RIFLE LOWER THAT IS NOT A REGISTERED SBR! Be aware of your LOCAL, STATE, and FEDERAL LAWS before ordering. Not for sale to HI.
Specifications:
- 7.5″ 5.56 Chambered Barrel
- M4 Feed Ramps
- Only 1 lbs 3.5 oz
- .750 Pistol Length Gas System
- 1:7 Twist QPQ Melonite
- Barrel is 4150 CrMo.
- Barrel Extension installed and headspaced
Best “Bang for the Buck” choice in barrels on the market today! Adams Arms has expanded its product line to now include a line of barrels. These barrels have proven to OUTPERFORM any mil-spec barrel on the market and come with a LIFETIME WARRANTY.
Current Barrels Disadvantages:
Standardchrome lined barrels are rifled with a slightly larger diameter thanwhat is needed. This is done so the hard chrome can be added on top ofthe surface area which will add to the tolerances. It leaves high andlow spots along with microscopic divots and deficits. Theseimperfections add resistance to the round as it travels down the barrel,slowing down the velocity. Accuracy and range of efficiency drops whenthe velocities on the round drop. This is evident even more so withtheshorter barrels. The trade off is hard chrome resists corrosionbetterthan the bare material the barrel is cut from and it does nothave ahigh cost associated with it. While eventually over time it willwearoff, hard chrome will outlast bare metal. You sacrifice accuracyforlongevity.
Stainless steel barrels are well known for highervelocities and better accuracy because the bore has been cut true intothe steel. This cut does not leave any added imperfections so the roundhas less resistance as it travels down the barrel. This quality doescome at a high price. Most stainless steel barrels cost almost twicewhat a chrome lined barrel cost, which prices them out of the market formost shooters. Also, while they have corrosive resistant properties bynature, they are not completely corrosive resistant and can corrodeovertime. They are the choice for most high end manufacturers andshootersbut they are not a viable option for every shooter.
Adams Arms Advantage:
Ourbarrels are finished with our proprietary QPQ Melonite process insideand out. Unlike hard chrome and magnesium phosphate, Melonite is amolecular bonding process with the metal. It allows the chemicals toseep down below the surface area of the metal, instead of just adding atop layer. This means that the barrel can be cut to a true rifle borewhile maintaining complete corrosion resistance and virtually no wear.It also means that the protection offered is not just a thin layer ontop of the material but actually penetrates layers deep ensuring that itdoes not wear off. Now you have the velocities of a stainless steel true rifle bore with complete protection!You can out last a chrome lined barrel and shoot with the accuracy andefficiency of a stainless steel barrel, all without breaking the bank.Check out velocity testing below.
The SBR velocity dataespecially stands out. The 7.5″ PDW AR is a now viable option forpersonal and professional defense as well as military units that need ashort CQB rifle with an effective range well past 100 meters. We havebeen getting even higher velocities out of our 11.5″ and 14.5″ barrels,with the 14.5″ averaging close to 3000 fps using military ammo. Our 16″barrels are getting velocities very close to a standard 20″ chromelinedAR15 barrel!
