Description
ODIN Works ATLAS 5 Compensator 5.56
When it comes to muzzle devices, ODIN Works brings true innovation with the ATLAS Compensator family. The ODIN Works ATLAS 5 features a 3-piece modular design that makes installation simple and fast. The core and the cap are machined from 416R stainless steel and black nitrided, while the sleeve is made from titanium. Timing and tuning are done with the titanium sleeve; no shims or crush washers are needed.
Compatible with the ODIN Works ATLAS Blast Shield.
Mfr Part: MB-ATLAS-5
Color: Silver / Black
Finish: Unfinished (Sleeve) / Black Nitride (Core and Cap)
Material: Titanium (Sleeve) / 416R Stainless Steel (Core and Cap)
Weight: 4.1 oz
Length: 2.56″
Width: 1″
Thread: 1/2″x28
Fits: .223 / 5.56
Features:
– Fully adjustable to counter unwanted muzzle rise and movement
– 3-piece modular design
– Timing and tuning is done with the titanium sleeve
– No crush washer or shims needed
– Core and the cap are machined from 416R stainless steel with Black Nitride finish
– Sleeve is made from titanium
– Works with the ODIN Works ATLAS Blast Shield
– Made in the U.S.A.
Includes:
(1) ODIN Works ATLAS 5 Compensator 5.56
(1) Hex Wrench
Installation:
– No shims or crush washers are needed.
– A medium thread locking fluid can be used.
– Using a 7/8 wrench, tighten the body of Atlas to the barrel.
– Slide the sleeve onto the Atlas body with the top indexing mark toward the chamber.
– For the initial installation, it is recommended that the index mark and hole are straight up.
– While holding the sleeve in place, tighten the cap using a 7/8 wrench.
– While holding the cap in place, lightly tighten the 3x setscrews on the front of the cap.
Adjustments:
– To counter right or left muzzle movement: loosen front set screws.
– Loosen cap.
– Rotate the sleeve a small amount.
– Rotate the top hole and index mark slightly in the direction that the muzzle is moving.
– Tighten cap and front set screws.
– To counter muzzle rise: drill out the top hole a minimal amount. Repeat if needed.
