Description
Revival Defense
HUB-DT Ti 5/8×24 Direct Thread Suppressor Mount
BLEM Notice: These units are 100% functional and fully within spec but have cosmetic imperfections. These are all engraved with “RD-B” on the top side. The type and severity of blemishes vary — some are minor, others more noticeable. All blemished item sales are final and non-returnable.
The RD HUB-DT is a lightweight titanium direct thread adapter compatible with HUB or 1.375×24 threaded suppressors. The HUB-DT allows you to thread your barrel directly into your HUB-compatible suppressor via the appropriate thread pitch—no QD system required. If you’re unfamiliar with HUB suppressors, you can read more about them here.
The HUB-DT features our patent-pending Castle-Lock™ system, allowing users to install the adapter using standard TDP-spec castle nut notches with a standard armorer’s wrench or with the integrated 1 5/16” wrench flats. It also includes chamfered edges to eliminate snag points.
The HUB-DT is a departure from traditional direct thread adapters. Rather than focusing solely on minimal length, we designed it to allow proper installation into both the suppressor and rifle using common tools—providing a more secure and consistent interface. Despite the added utility, the HUB-DT maintains a low weight thanks to its Grade 5 titanium construction, weighing just 1.41 oz and adding only 0.34” to overall suppressor length while still providing full access to the wrench flats on the device. The HUB-DT is perfectly suited for any Gas Gun, Bolt Gun or your lightweight hunting rifle.
What’s Included
1x RD HUB-DT 5/8×24 Direct Thread Adapter – BLEM
1x 0.5ml Rocksett Tube
Specifications
- Castle-Lock™ – TDP-spec castle nut notches for installation with a standard armorer’s wrench or 1 5/16” wrench flats
- Chamfered edges to reduce snag points
- Thread Pitch: 5/8×24
- HUB / Bravo (1.375×24) suppressor compatible
- Adds 0.34” to suppressor length
- Weight: 1.41 oz
- Material: Grade 5 Titanium
- Finish: DLC Coated
- NOTE: To use HUB-DT on a MK18 RIS II 10.3″ you must use an accuwasher / shim due to the slightly recessed barrel shoulder
- Proudly designed and manufactured in the USA
Installation
