Description
RRA 4.5lbs Two Stage Varmint Trigger Rock River Arms National Match AR15 AR10
With 4.5 to 5 pound pull weight. Note: comes with blue instruction card.
Rock River Arms RRA two-stage match trigger is a NIGHT AND DAY improvement over standard gritty 7-9lbs AR triggers and will instantly improve your accuracy.
A drop-in, match grade trigger, it provides a crisp, 5.5LB 2-stage, trigger pull to improve accuracy for competition or varmint shooting. Sear engagement point is located behind the hammer to reduce pull weight. Low mass hammer speeds lock time. Includes trigger and hammer pins. Fits AR-15 receivers with .154″ hammer and trigger pins.
SPECS: Steel, matte black finish. Fits Standard (NOT COLT) AR-15 receivers with .154″ hammer/trigger pins only (Like DPMS, RRA, Armalite, Olympic, etc.).
Question:
Can I use this on my LR-308, AR10 or R25?
These rifles use small pins (0.154″) for trigger and hammer and you can use this setup to greatly improve your factory trigger and maintain reliability.
What is a two stage trigger?
A single-stage trigger has little or no takeup; if there istakeup, it is purely due to slack in the trigger mechanism. A two-stagetrigger is designed to have a distinct takeup, with the trigger workingagainst a significant amount of spring pressure. At the end of thetakeup travel, there is a small but noticeable increase in pull as thesear begins to disengage. The two-stage trigger might have a pull forceof 4.5 pounds force, but first and second stages differ in pull by onlyounces. As the shooter prepares to fire, enough pressure is applied tohandle the takeup, or first stage. Then the shooter pauses to finishaiming, and then the tiny amount of additional pressure is applied toovercome the release, or second stage of the pull. This gives thehandling safety (preventing accidental discharge) of a heavier trigger pull, with most of the advantagesof a light, crisp single-stage trigger.
